How to Create an HTTP Proxy Using Squid on Ubuntu 18.04

This guide will show you how to create your own HTTP proxy using Squid, a highly customizable proxy/cache application, on Ubuntu 18.04. An HTTP proxy acts as an intermediary between you and the internet. While connected to your Squid HTTP proxy, you will be able to:

• Anonymously access internet services.
• Bypass certain regional and local network restrictions.

Note

The traffic passed from your client to your Squid HTTP proxy will not be encrypted and will still be visible on your local network. If you are looking for a solution that offers greater security, you may want to look at our guides on Setting up an SSH Tunnel or Deploy OpenVPN Access Server with Marketplace Apps.

Install Squid

1. Secure your Linode by completing the instructions in our guide on Securing Your Server, including adding a limited user account and configuring a firewall.

   Note

   This guide is written for a limited, non-root user. Commands that require elevated privileges are prefixed with sudo. If you are not familiar with the sudo command, you can check our Users and Groups guide.

2. Ensure that your system is up-to-date:

   sudo apt-get update && sudo apt-get upgrade
   

3. Install Squid using the apt software package manager:

   sudo apt-get install squid
   

4. Copy the original configuration file to keep as a backup:

   sudo cp /etc/squid/squid.conf /etc/squid/squid.conf.default
   

   Note

   The Squid configuration file includes comprehensive documentation in its commented lines, along with several uncommented rules that will remain active. These default rules should not be modified while you are following this guide. To gain a deeper understanding of Squid’s options and default settings, you can review the full configuration file.

Configure Client Access

Now that you have Squid installed on your Linode, you can configure ways for it to accept connections and serve as an HTTP proxy. The following sections provide different ways for your Squid HTTP proxy to authenticate client connections. You can configure Squid to use either or both authentication methods.

IP Address Authentication

A simple way to use Squid as an HTTP proxy is to use a client’s IP address for authentication.

1. Edit the Squid configuration file and add the following lines at the beginning of the file:

   File: /etc/squid/squid.conf

   1 2	acl client src 192.0.2.0 # Home IP http_access allow client

   Replace client with a name that identifies the client computer that will connect to your Squid HTTP proxy, then replace 192.0.2.0 with the client computer’s IP address. You can also update the optional comment # Home IP to further describe the client.

2. Alternatively, you can configure multiple clients by adding new acl lines to /etc/squid/squid.conf and including them in the http_access allow line as follows:

   File: /etc/squid/squid.conf

   1 2 3

   acl client1 src 192.0.2.0 # Home IP acl client2 src 192.0.2.1 # Work IP http_access allow client1 client2

   Replace client1 and client2 with names that identify the client computers, then replace 192.0.2.0 and 192.0.2.1 with their corresponding IP addresses. Update the optional comments # Home IP and # Work IP with accurate descriptions to help keep track of multiple clients. Access to the proxy is granted by adding the names defined by each acl to the http_access allow line.

User/Password Authentication

You can also configure your Squid HTTP proxy to accept authentication with usernames and passwords.

1. Install htpasswd by installing the Apache utility programs. If you have installed Apache on your Linode, you will already have it and can skip this step.

   sudo apt-get install apache2-utils
   

2. Create a file to store Squid users and passwords:

   sudo touch /etc/squid/squid_passwd
   

3. Change ownership of the password file:

   sudo chown proxy /etc/squid/squid_passwd
   

4. Create a username password pair, replacing user1 with the name of the user you’d like to add:

   sudo htpasswd /etc/squid/squid_passwd user1
   

   You will be prompted to create a password for this user:

   New password:
   Re-type new password:
   Adding password for user user1

   You can repeat this step at any time to create new users.

5. Check the location of the nsca_auth file:

   sudo dpkg -L squid | grep ncsa_auth
   

6. Edit the Squid configuration file and add the following lines at the beginning of the file:

   Note

   Ensure that you update /usr/lib/squid/basic_ncsa_auth below with the location of the nsca_auth file that you checked in the previous step.

   File: /etc/squid/squid.conf

   1 2 3

   auth_param basic program /usr/lib/squid/basic_ncsa_auth /etc/squid/squid_passwd acl ncsa_users proxy_auth REQUIRED http_access allow ncsa_users

7. To remove a user’s access to the proxy, you must delete the corresponding entry in the squid_passwd file. Each user is represented in the file on a single line in the format of user:passwordhash:

   File: /etc/squid/squid_passwd

   1	user1:\$p948w3nvq3489v6npq396g user2:\$q3cn478554387cq34n57vn

   If you are using Nano, the command Control+k will remove the entire line where the cursor rests.

   Once you’ve saved and exited the file, complete user removal by restarting Squid:

   sudo systemctl restart squid
   

Combined Authentication

You can combine authentication methods using the same acl definitions that you have added in the previous two sections by using a single http_access rule.

1. Remove any previous http_access lines you have added.

2. Edit the Squid configuration file so that the lines you have added at the beginning of the file follow this form:

   File: /etc/squid/squid.conf

   1 2 3 4 5

   acl client1 src 192.0.2.0 # Home IP acl client2 src 192.0.2.1 # Work IP auth_param basic program /usr/lib/squid/basic_ncsa_auth /etc/squid/squid_passwd acl ncsa_users proxy_auth REQUIRED http_access allow client1 client2 ncsa_users

   Note

   Take care to avoid using multiple http_access rules when combining authentication methods, as Squid will follow the rules in the order that they appear. By using a single http_access rule for your acl definitions, you will ensure that several authentication methods will apply to each client that attempts to connect to your Squid HTTP proxy.

Anonymize Traffic

Here, you will add rules to mask client IP addresses from the servers that receive traffic from you Squid HTTP proxy. Without these rules, the originating client IP addresses may be passed on through the X-Forwarded For HTTP header.

Add the following lines at the beginning of the Squid configuration file:

File: /etc/squid/squid.conf

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

forwarded_for off request_header_access Allow allow all request_header_access Authorization allow all request_header_access WWW-Authenticate allow all request_header_access Proxy-Authorization allow all request_header_access Proxy-Authenticate allow all request_header_access Cache-Control allow all request_header_access Content-Encoding allow all request_header_access Content-Length allow all request_header_access Content-Type allow all request_header_access Date allow all request_header_access Expires allow all request_header_access Host allow all request_header_access If-Modified-Since allow all request_header_access Last-Modified allow all request_header_access Location allow all request_header_access Pragma allow all request_header_access Accept allow all request_header_access Accept-Charset allow all request_header_access Accept-Encoding allow all request_header_access Accept-Language allow all request_header_access Content-Language allow all request_header_access Mime-Version allow all request_header_access Retry-After allow all request_header_access Title allow all request_header_access Connection allow all request_header_access Proxy-Connection allow all request_header_access User-Agent allow all request_header_access Cookie allow all request_header_access All deny all

Enable Connections

Next, you will enable clients to connect to your Squid HTTP proxy.

1. Save and exit the Squid configuration file.

2. Restart Squid to enable the rules you have added:

   sudo systemctl restart squid
   

3. Implement firewall rules to enable port 3128, which is the default service port used by Squid:

   sudo ufw allow 3128/tcp
   

   You can find more information on configuring firewall rules for Ubuntu in our guide on How to Configure a Firewall with UFW.

Connect to your Squid HTTP Proxy

Your Squid HTTP proxy is now ready to accept client connections and anonymously handle internet traffic.

At this point, you can configure your local browser or operating system’s network settings to use your Linode as an HTTP proxy. The settings to do this will vary depending on your OS and browser. Instructions for certain OS and browser settings are located in the More Information section below.

Generally, connecting to your Squid HTTP proxy requires the following information:

• The IP address or domain name associated with your Linode.
• The port that is being used by Squid. The default port is 3128.
• A username and password if you have configured them for authentication.

Once you have established your OS or browser settings, test the connection by pointing your browser at a website that tells you your IP address, such as:

• ifconfig.me
• WhatIsMyIP.com
• Googling “what is my ip”

The result should display your Linode’s IP address instead of the IP address of your client computer.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• Squid Official Site
• Configure Proxy on Windows
• Proxy Server Settings on macOS
• Connection Settings in Firefox