How to Install Node.js and NGINX on Ubuntu 18.04

Node.js is an open-source JavaScript runtime environment that can serve dynamic and responsive content and is often used to create and serve web applications. When serving Node.js applications, NGINX is commonly used to create a reverse proxy that points at a running Node.js server. In this guide, you will install and configure NGINX on an Ubuntu 18.04 Linode. NGINX will handle requests to static files, like index.html and also, create a reverse proxy to a Node.js server. You will then create a test JavaScript file in order to test your running Node.js server.

Before You Begin

If you want to use a custom domain name for your site, purchase a domain name from a trusted registrar and use Linode’s DNS Manager to add the domain and create a domain record for it.
Set up your Linode using the Getting Started and Setting Up and Securing a Compute Instance guides.
Note
Don’t forget to update your Linode’s /etc/hosts file with its public IP address and your site’s fully qualified domain name, as explained in the Update Your System’s hosts File section of the Getting Started guide.
Note
This guide is written for a non-root user. Commands that require elevated privileges are prefixed with sudo. If you’re not familiar with the sudo command, visit our Users and Groups guide.
All configuration files should be edited with elevated privileges. Remember to include sudo before running your text editor.

Install and Configure NGINX

Install NGINX and the screen utility. You will use screen in the Create Your the Node.js Web Server File.
```
sudo apt-get install nginx screen
```
Start NGINX and enable it to start automatically on reboots.
```
sudo systemctl start nginx
sudo systemctl enable nginx
```

Using your preferred text editor, create a new NGINX site configuration file located in the /etc/nginx/sites-available/ directory. Replace the example file name and any instances of example.com with your own domain name or IP address.

File: /etc/nginx/sites-available/example.com

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
#Names a server and declares the listening port
server {
    listen 80;
    server_name example.com www.example.com;

    #Configures the publicly served root directory
    #Configures the index file to be served
    root /var/www/example.com;
    index index.html index.htm;

    #These lines create a bypass for certain pathnames
    #www.example.com/test.js is now routed to port 3000
    #instead of port 80
    location ~* \.(js)$ {
        proxy_pass http://localhost:3000;
        proxy_set_header Host $host;
    }
}

Create a symlink from your NGINX configuration file in the sites-available directory to the sites-enabled directory.
```
 sudo ln -s /etc/nginx/sites-available/example.com /etc/nginx/sites-enabled/example.com
```
Remove the symlink from NGINX’s default site configuration file.
```
sudo rm /etc/nginx/sites-enabled/default
```

Verify that there are no syntax errors in your site’s configuration file.

 sudo nginx -t

Your output should resemble the following:

nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful

Restart NGINX to load your site’s configuration.
```
sudo systemctl restart nginx
```

Create Your Site’s Index File

Note
Ensure you replace example.com with your own site’s name or IP address in all commands and examples in this section.

Create your site’s root directory, which will store the index.html file you will create in the next step. The directory’s location should be the one you designated in your site’s NGINX configuration file for the root configuration.
```
 sudo mkdir -p /var/www/example.com
```

Using the text editor of your choice, create your site’s index file in the root directory using the example below.

File: /var/www/example.com/index.html

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
<!DOCTYPE html>
<html>
<body>

<p><strong>If you have not finished the <a href="https://www.linode.com/docs/guides/how-to-install-nodejs-and-nginx-on-ubuntu-18-04/">guide</a>, the button below will not work.</strong></p>

<p>The button links to test.js. The test.js request is passed through NGINX and then handled by the Node.js server.</p>

<a href="test.js">
<button type="button">Go to test.js</button>
</a>

</body>
</html>
    

Create Your Node.js Web Server

Install Node.js

Install the Node Version Manager (NVM) for Node.js. This program helps you manage different Node.js versions on a single system.
```
sudo wget -qO- https://raw.githubusercontent.com/creationix/nvm/v0.35.3/install.sh | bash
```

Load NVM in your current terminal session.

 export NVM_DIR="$([ -z "${XDG_CONFIG_HOME-}" ] && printf %s "${HOME}/.nvm" || printf %s "${XDG_CONFIG_HOME}/nvm")"
 [ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"

Verify that you have access to NVM by printing its current version.

 nvm --version

You should see a similar output:

0.35.3

Install Node.js.
Note
As of writing this guide, the latest LTS version of Node.js is v12.16.2. Update this command with the version of Node.js you would like to install.
```
nvm install 12.16.2
```
Use NVM to run your preferred version of Node.js.
```
 nvm use 12.16.2
```
Your output will resemble the following
```
Now using node v12.16.2 (npm v6.14.4)
```

Create a Test JavaScript File

In the Install and Configure NGINX section you configured NGINX to listen on port 80 to serve its static content. You also configured a reverse proxy to your Linode’s localhost:3000 when a request for the /test.js file is made. In this section you will create the test.js file to be able to test your Node.js web server that you will create in the next section.

Note
Ensure you replace example.com with your own site’s name or IP address in all commands and examples in this section.

Create the test.js file in your site’s root directory.

File: /var/www/example.com/test.js

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
<!DOCTYPE html>
<html>
<body>

<h2>
Your Node.JS server is working.
</h2>

<p>
The below button is technically dynamic. You are now using Javascript on both the client-side and the server-side.</p>

<button type="button" onclick="document.getElementById('sample').innerHTML = Date()"> Display the date and time.</button>
<p id="sample"></p>

</body>
</html>
    

Create the Node.js Web Server File

In this section, you will create a file named server.js that will use Node.js modules to help you write a simple web server that can handle client requests and return responses to them.

In your site’s root directory, create the server.js file with the following content.

File: /var/www/example.com/server.js

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
//nodejs.org/api for API docs
//Node.js web server
var http = require("http"),                           //Import Node.js modules
    url = require("url"),
    path = require("path"),
    fs = require("fs");

http.createServer(function(request, response) {       //Create server
var name = url.parse(request.url).pathname;           //Parse URL
var filename = path.join(process.cwd(), name);        //Create filename
fs.readFile(filename, "binary", function(err, file) { //Read file
    if(err) {                                         //Tracking Errors
        response.writeHead(500, {"Content-Type": "text/plain"});
        response.write(err + "\n");
        response.end();
        return;
    }
    response.writeHead(200);                          //Header request response
    response.write(file, "binary");                   //Sends body response
    response.end();                                   //Signals to server that
 });                                                  //header and body sent
}).listen(3000);                                      //Listening port
console.log("Server is listening on port 3000.")      //Terminal output
        

Run a new screen session.
```
 screen
```
Press return when prompted.
Navigate to your root directory where your test.js file is located.
```
 cd /var/www/example.com
```
Run your Node.js web server. Appending & to the end of a command will keep the web server’s process running in the background.
```
 node server.js &
```
You should see your terminal return a process ID after issuing the previous command. Return to your command prompt by entering CTRL+C.
Exit your screen session by pressing Ctrl+A then d.
Open a browser and navigate to your site’s domain or IP address. You should see your site’s index.html page load.
Click on the page’s Go to test.js button to load the test.js page whose content will be served dynamically with your Node.js web server.
Click on the test page’s Display the date and time button to dynamically display the current date and time.

You have now completed the basic configurations to proxy requests to the Node.js server you wrote. As a next step, you may consider looking into further NGINX configurations to better handle serving static content and dynamic content from a reverse proxy.

There are many frameworks to help you continue to develop web apps using JavaScript. You may consider using Express.js, Ember.js, or Vue.js.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

Featured

Why Linode

Get to Know Us Better

Featured

Compute

Storage

Databases

Services

Networking

Developer Tools

Featured

Solutions

Featured

Pricing

Free eBook

Community

Engage With Us

Search Results

No Results

Filters

Installing Node.js and NGINX on Ubuntu 18.04

Before You Begin

Install and Configure NGINX

Create Your Site’s Index File

Create Your Node.js Web Server

Install Node.js

Create a Test JavaScript File

Create the Node.js Web Server File

More Information

Your Feedback Is Important